ESD MANUFACTURING & SUPPLY

WELCOME TO

ESD SURFACE RESISTIVITY METER (WITH 10 LEDS)

SPECIFICATION

Power Supply	9 Volts PP3 Alkaline Battery
Test Voltage	Nominal 9 Volts
Temperature Range:
Operating	40F to 120F (5C to 49C)
Storage	(-15C to +60C)
Relative Humidity	0% to 90% (non-condensing)
Resolution	One order of magnitude
Changeover Point	_decade on a logarithmic scale (3.16 * 10n)
Changeover Point Accuracy	+/-_decade
Accuracy	+/- 10%
Repeatability	+/- 5%
Weight	6 ounces
Dimensions	130mm * 70mm * 25mm

To measure surface resistivity:

-Simply place the meter on the surface of the material that requires measuring.

-Press the green test button. The meter will then light the appropriate LED from 10 to the power of 3 to 10 to the power of 12 Ohms per square or insulative.

To measure resistance to ground:

-Simply place the meter on the surface of the material that requires measuring.

-Insert the earth wire into the earth socket attaching the alligator clip to ground point.

-Press the green test button. The meter will then light the appropriate LED from 10 to the power of 3 to 10 to the power of 12 Ohms per square or insulative.

The meter uses precise spaced parallel bars to sense its measurements and operates with a 9-volts PP3 battery, which can last more than 40 hours of testing time. Calibration of the unit is recommended and this can be obtain by contacting your dealer.

BACK